| Panel Connectivity |
Panel connection: LVDS (4 channel)
Panel resolutions - standard: 1920x1200, 1920x1080, 1680x1050, 1600x1200, 1600x900, 1440x900, 1366x768, 1280x1024, 1280x800, 1280x768, 1024x768, 1024x600, 800x600, 800x480, 640x480.
Panel resolutions - custom: Square and banner types including custom cut panels.
Colors: Up to 10 bit per color (ie 1.06 billion colors).
Panel power: Supports 3.3V, 5V, 10V, 12V, 18V.
Backlight inverter/driver brightness support: Analog or PWM.
Backlight power: DPMS enables pin (3.3V or 5V).
|
| Input: HDMI 1.4 (x1) |
60Hz up to 1920x1200 (up to 2560x1600 then downscaled to match panel)
75Hz up to 1600x1200
Audio Signal: Pass through of digital audio to S/PDIF output and analog audio line-out.
Control: DDC/CI
|
| Input: DVI-I (x1) |
60Hz up to 1920x1200
75Hz up to 1600x1200
|
| Input: Displayport (x1) |
60Hz up to 1920x1200 (up to 2560x1600 then downscaled to match panel)
75Hz up to 1600x1200
|
| Function Interface |
On Screen Display (OSD) menu
Functions can be called by buttons or IR remote control.
Functions are also accessible via a Serial port (RS-232) & Ethernet (optional).
|
| Functions |
Basic: Auto configuration, Brightness, Black level, Contrast, Clock, Phase, Color, temperature, Image position, Saturation, Hue, Gamma, Sharpness.
Additional: System Information, Scaling to fill screen and fill to aspect ratio, OSD timeout, OSD transparency, Factory reset, Picture in Picture and Picture by Picture, Programmable hot keys. Support for options such as ambient light sensor, Graphics image rotation, Anti-image retention, Monochrome mode.
TBA: Image flip (Orientation), Freeze & zoom, Text overlay, Baud rate selection
|
| Audio |
Audio line out (from header) with OSD volume control (not amplified), SPDIF
|
| Power |
Connectors: Molex 43650-0200 compatible or Model 2-pin 0.156" pitch
Requirements: +12/24VDC, ±5%, 4W (controller power only, not panel or backlight)
Fuse: Non-resettable type.
|
| Size |
179.1mm x 120.4mm - see drawing for details
|
| Other |
Status indicators on board: Dual color or LED
Plug & Play: DDC 1.2/b compatible
|
Build options
(subject to MOQ) |
- On-board LED backlight driver, supports 4 LED strings max 50V total LED backlight via J10 connector (same design and usage as implemented on SVX-4096)
- USB type A connector instead of internal header, this is for firmware upgrade purposes only
- Ethernet connection for RS-232 commands, 10Mbit, built-in web server for network configuration
- Internal headers for DVI, HDMI and DisplayPort
|
| Reliability |
MTBF TBD
Warranty 3 years
|
| Volatility |
See download link in sidebar.
|
| Initial release date |
Scheduled for Q3, 2021
|
